Bobs Distributing, Inc. - Complete integrated automatic door or gate systems, automatic door and gate operators, parts, telephone entry, repair parts.

Categories

All Categories
MyQ Accessories
Swing Gate Openers
Slide Gate Operators
Barrier Arm Operators
Overhead Gate Operators
Commerical Door Operators
Residential Garage Door Operators
Telephone Entry Systems
Accessories
Remotes and Transmitters
Wireless Keypads
Receivers
Garage Door Accessories

DKS 6300 Swing Gate Operator (DKS6300)

DKS 6300 Swing Gate Operator

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Self-adjusting, no maintenance magnetic limits.

Overlap feature for dual swing gate operation.

Designed with a built-in primary and secondary entrapment prevention system.

Ports for plug-in loop detectors.

Two convenience outlets.

Fail-safe release.

Tamper detect circuit.

DC Powered convenience open (optional).

Gate tracker reporting output.

Programming switches.

Built-in reset switch.

Built-in power On/Off switch.

Model 6300-080 with 1/2 HP Motor

Maximum gate width 18-feet.

Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

Swings gate 90 degrees in approximately 15-seconds.

1/2 HP continuous-duty motor.

115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

Class I, II, III and IV applications.

Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)

Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

LIST PRICE: $2,540.00

Model 6300-084 with 1 HP Motor

Maximum gate width 22-feet.

Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

Swings gate 90 degrees in approximately 15-seconds.

1 HP continuous-duty motor.

115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

Class I, II, III and IV applications.

Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)

Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

LIST PRICE: $ 2,990.00

Options Availiable

Primary / secondary connection cable (secondary operator is shipped with 50-feet of cable).
Post or pad mount - specify which.
DC powered convenience open.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.

Product Literature

Miscellaneous :
Email a Friend
Product Inquiry

Related Products :

All > Swing Gate Openers

	Powered by Bob's Distributing, Inc

Page displayed in: 0.1250 seconds.

Call us toll free

800-345-1147