Bob's Distributing Innovative Access Controls

Call us toll free

800-345-1147

 
   
Categories
All Categories 
Access Control
Slide Gate Operators
Swing Gate Operators
Commerical Door Operators
Garage Door Operators
Barrier Gate Operators
Overhead Gate Operators
Accessories



DKS 6050 Swing Gate Operator (DKS6050)

DKS 6050 Swing Gate Operator

DKS 6050 Swing Gate Operator
 
 
 The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications.   These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.   You need to specify which mounting method when ordering.   The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate.   This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.   The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. 
 
  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open (Option on 6100 only).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

    Model 6050-080

  • Maximum gate width 10-feet.
  • Maximum gate weight 400 pounds*.   (*Assumes gate swings level and is in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator).
  • Swings gate 90 degrees in approximately 10-seconds.
  • 1/2 HP limited-duty motor.
  • 115 VAC, 4.3 Amps.
  • Class I applications.
  • Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
  • Dimensions (operator only): 13.25"W x 12"H* x 23"D   (* Height of operator only.   Actual height above ground is determined by which mounting method is used)
  • LIST PRICE: $2,020.00
  • Model 6100-080

     
     



    Miscellaneous :
    Email a Friend
    Product Inquiry
        


    Related Products :


     
      Powered by Bob's Distributing, Inc  
    Page displayed in: 0.1250 seconds.
     
    Products Accessories
    Slide Gate Operators Transmitters
    Swing Gate Openers Wireless Keypads & Accessories
    Barrier Arm Operators Receivers
    Overhead Gate Operators Telephone Entry Systems
    Residential Garage Door Operators Keypads
    Commerical Door Operators  
    Bob's Distributor is a meember of the International Door Association Bob's Distrivutor is a member of the American Fence Association