The Model 9050 operators are designed to operate vehicular slide
gates in residential and light-duty commercial applications only.
These operators are designed so that they can easily be mounted in the
front, center or rear of the gate without any costly and time consuming
field modifications. In addition, the operators can be pad or post
mounted to meet any installation requirements.
*Self-adjusting, no maintenance magnetic limits.
*Ports for plug-in loop detectors.
*Two convenience outlets.
*Fail-safe release (fail-secure optional).
*Programming switches.
*Built-in reset switch.
*Built-in power On/Off switch.
Model 9050-080
*Maximum gate length 16-feet.
*Maximum gate weight 300 pounds*. (*Assumes gate is on level
ground, in good condition with properly adjusted hardware. Other
external factors may affect the performance of the gate operator.)
*1/2 HP limited-duty motor.
*115 VAC, 4.3 Amps.
*Class I applications.
*Compliant with UL 325 and 991. ETL Listed. (Note: To be
compliant with UL 325 and industry safety guidelines, a secondary
entrapment prevention device(s) is required to be installed with this
gate operator.)
*12"W x 24"H x 11.5"D
*LIST PRICE: $1,570.00
Options Availiable
#40 chain.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Base plate to post mount this operator (does not include posts).
Surge suppressors.
Product Literature