Bob's Distributing > Products > Swing Gate Operaters

The Miracle-One™ is a DC-powered swing gate operator designed to deliver smooth, ultra-quiet performance. With state-of-the-art features like a battery backup, anti-theft alarm system, variable speeds and optional solar panels, this gate operator makes security smart. Even smarter is the ease with which this system can be installed. Backed by the most comprehensive support available, the Miracle-One™ is the complete solution.

Variable speed, 24 V DC
Battery backup
600 pounds of torque for exceptional power
Built-in radio receiver compatible with Security+® transmitters
Improved limit switch system
Ultra-quiet operation
External alarm reset button
Weatherproof housing
Compact modern design
Emergency key release
ERD and alarm included
Dust protector
Added surge protection and spike suppression
2-year warranty

Product Manual

The Robo Swing is our most advanced swing gate operator for single family residences and residential complexes up to 15 units. Designed for super-quiet operation, it can handle up to 250 cycles per day (when used with a plug-in transformer) with gates weighing up to 400 lbs. and up to 16 feet in length.

Unlike other systems, the Robo Swing™ is designed with a "non-scissor action" swing arm to greatly reduce the risk of injury. What´s more, the system features a DC motor with a 12-volt, 7-amp hour battery for dependable operation, even when the power goes out. Plus, this system helps to simplify installation by allowing installers to use low-cost, low-voltage wiring or an optional solar panel for operator use in remote locations.

Permanent magnetic 12-volt DC motor
Modular control board uses LEDs to indicate all input and ouput functions
Sealed 12-volt, 7-amp battery
Modular surge suppressor
Easy gate connection with release handle
Non-scissor action arm
Reversing sensor
Limit switch
Access door
3-year warranty

Product Manuals

The CSW200UL models of swing gate operators are the first choice for heavy-traffic applications such as large gated communities, residential developments, commercial complexes, and private estates. Unlike other systems, the CSW gate operators are designed with a "non-scissor action" swing arm to greatly reduce the risk of injury. And all models include the safety and reliability of our OmniControl™ board, the most advanced control board in the industry.

Featuring the highest quality components and backed by years of proven dependability, each unit is carefully inspected and mechanically tested to provide unsurpassed reliability. Unique engineering innovations in each model also ensure that there's a CSW to meet practically every swing gate application.

120V AC power
24V DC board
Built-in radio receiver
Highly efficient, extremely quiet
Surge/lightning protection
Alarm reset button
Weatherproof high-density polyethylene cover
Gold zinc-plated chassis eliminates corrosion
High-speed precision limit switches
Solid steel, machined pulley
#41 chain
7-year warranty for residential applications;
5-year warranty for commercial applications

The CSW200UL gate operator is available in the following models:

CSW200UL: standard model with a polyethylene cover
CSW200ULST: standard model with a stainless steel cover
CSW200ULDM: dual motor for heavier traffic and higher temperatures
CSW200UL1HP: heavy-duty, 1 horsepower model for heavier gates

Product Manuals

A reliable gear-driven swing gate operator for residential applications, the LiftMaster® SW420 offers a compact design that supports gate lengths up to 12 feet and gate weights up to 300 pounds. Powder-coated weather-resistant steel enclosure and a high-starting torque motor with built-in overload protection ensure strong, dependable performance. This model is ideal for residential installations and is UL325 compliant.

Built-in radio receiver
Inherent obstruction sensing
External obstruction sensing
Advanced dual gate operation
Sequenced access management
Digital logic control
LED indicators
Warning device
Loop detector inputs
Timer to close
Maximum run timer
Emergency stop button
Maglock control
Gear drive reduction
Control inputs
Radio control
Limit settings
Surge & spike protection
Quick-release disconnect
Fold-down access door
2-year warranty

Product Manuals

This DC-powered system features soft start/soft stop operation for mechanical parts protection via a prewired, solid state control system. Optional equipment includes battery-run as well as solar packages that are configurable to meet your power needs. Designed to support a maximum gate weight of 300 pounds and maximum gate length of 13 feet.

DC-based operator
Inherent obstruction sensing
External obstruction sensing
Control inputs
Single/dual gate operation
Electronic braking
Timer to close
Maximum run timer
LED indicators
Limit switches
External manual disconnect
Post mount
2-year warranty

FULL SYSTEMS CAPABILITY CIRCUIT BOARD

Built-in radio receiver
Built-in fully adjustable timer to close
Adjustable gate sensitivity feature
Fully adjustable inherent obstruction detection system
LED to ease installation and speed diagnostics
Safety inputs

Product Manuals

The LiftMaster® SW470 is a heavy-duty commercial swing gate operator for use in high-cycle applications such as gated communities and commercial access. Supporting gate lengths up to 12 feet, gate weights up to 500 pounds and utilizing a weather-resistant powder-coated steel enclosure, the SW470 ensures rugged and reliable performance. This model is ideal for commercial applications and is fully UL325-compliant.

Built-in radio receiver
Inherent obstruction sensing
External obstruction sensing
Advanced dual gate operation
Sequenced access management
Digital logic control
LED indicators
Warning device
Loop detector inputs
Timer to close
Maximum run timer
Emergency stop button
Maglock control
Gear drive reduction
Control inputs
Limit settings
Surge & spike protection
Manual disconnect
Removable access control panel
2-year warranty

Product Manual

The Mega Swing is a DC-powered addition to the LiftMaster® family of gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, this model provides exceptional starting torque and continuous operation, making it ideal for most applications. Constructed with an aluminum alloy chassis, it's corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports gates weighing up to 650 lbs. and up to 18 ft. in length.

No power? No problem!
Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.

Radio receiver built-in
Aluminum alloy chassis
Built-in battery backup
Soft start/stop
DC operator system
Larger cabinet
Control inputs
Inherent obstruction sensing
LED indicators
Dual gate operation
Dynamic braking
Non-scissor swing arm
Timer to close
2-year warranty for electronics and mechanism;
10-year warranty for chassis and cover

Product Manual

The LiftMaster® SW490 offers powerful performance for high cylce and heavy industrial swing gate applications. This hefty design supports gate lengths up to 22 feet and gate weights up to 1,000 pounds. Utilizing a weather-resistant powder-coated steel enclosure, a worm gear reduction drive, and high-starting torque motor, the SW490 offers you years of reliable and powerful performance. This model is ideal for demanding industrial applications and is fully UL325-compliant.

Built-in radio receiver
External obstruction sensing
Advanced dual gate operation
Sequenced access management
Digital logic control
LED indicators
Warning device
Loop detector inputs
Timer to close
Maximum run timer
Emergency stop button
Maglock control
Gear drive reduction
Control inputs
Limit settings
Surge & spike protection
Manual disconnect
Removable access control panel
2-year warranty

Product Manuals

The LA400 has a powerful 24VDC motor, which provides exceptional starting torque and features soft start/stop operation. This promotes longer gate and operator life, as well as dependable performance. The LA400 is capable of operating gates up to 16 ft. long and weighing up to 550 pounds.

An on-board radio receiver is included with the LA400. Exclusive from Chamberlain, this provides a single remote control solution for gates and additional access points.

On-board radio receiver
DC operator system
Battery-run system
Slow start/stop
Inherent obstruction sensing
External obstruction sensing
Control inputs
Bi-part latch
Timer to close
LED indicators
Electronic limit system
Keyed manual disconnect
2-year warranty

Product Manuals

The standard specifications and features of this gate operator showcase the commitment made in its concept and design. Whether it’s the simple, clean installation, energy efficient operation, or advanced battery backup function, this operator stands alone in it’s class.

• UV stablilized polyethylene cover

• clam shell cover design
• reinforced chassis
• fail-safe / fail-secure clutch
• simple limit switch arrangement
• soft-start / soft-stop
• intelligent obstruction detection
• on-board lightening protection
• built-in three push button station
• 120/220 VAC power source

Product Manual
Product Literature

Viking Access introduces gate operation with no belts, chains or extra coupling mechanisms. The R-6™ swing gate operator is capable of handling gates up to 600 lbs. and 14’ long. The direct drive mechanism in combination with the adaptable algorithms in the control board set a new standard in gate automation.

• simple limit switch arrangement

• fail-safe / fail-secure clutch
• 800 cycles in case of power failure
• direct-drive gear head motor
• soft-start / soft-stop
• intelligent obstruction detection
• UV stabilized polyethylene cover
• 120 / 220 VAC power source
• clam shell cover design
• on-board lightening protection

Product Manuals
Product Literature

With its compact, low profile design and the power to support 700 lbs of weight along with gate lengths of up to 16 feet, the Viking G-5™ will revolutionize the idea of gate operation. This operator is manufactured with the highest quality components and is designed to accent any gate style. The G-5™ is capable of continuous cycles operation at 24V DC, converted directly from an AC line. The battery back-up provides up to 400 cycles of operation with a maximum capacity gate.

• easily accessed key release

• high efficiency power supply
• easy access to limit switch
• 400 cycles in case of power failure
• adjustable timer for automatic close
• on-board lightening protection
• built-in three push button station

Product Manuals
Product Literature

The standard specifications and features of the X-9™ gate operator showcase the commitment made in its concept and design. Whether it’s the simple, clean installation, energy efficient operation, or advanced battery backup function, this operator stands alone in its class. Included with the standard package are high quality direct burial cable, the complete control center and the X-9™ operator.

• adjustable timer for automatic close

• high efficiency power supply
• built-in battery backup
• on-board lightening protection
• easy access to limit switch
• 800 cycles in case of power failure
• built-in three push button station

Product Manual
Product Literature

1HP with battery backup are simple but powerful words describing the Viking T-21™ gate operator. The T-21™ is our heavy duty swing gate operator capable of handling gates up to 1200 lbs. and 20' long. Smooth efficient gate movement is achieved with soft-start and soft-stop using the newest technology in electronics.

• 1 H.P. solution
• built-in battery backup
• highly efficient gear-head-motor unit • 3 Amps on a 120 VAC circuit
• simple switch to 220 VAC
• convenient switch /power receptacles • room for external accessories
• built-in lightning protection.

Product Manual

The answer for an elegant solution for access control is fulfilled with the i-8 gate operator. The discreteness of the installation, the flexibility of operation, the efficiency of automation, and the adaptability of integration makes the i-8 gate operator a perfect solution in situations where aesthetics are required to satisfy the most exquisite taste.

• water resistant gear head unit

• single stage, efficient gearing
• configured to open left or right
• 400 cycles during power failure
• internal parts are made of
  aluminum, stainless steel and
   plated steel
• stainless steel casing available
• powerful and efficient DC brush
   motor in direct-drive configuration
• key for manual release

Product Manual
Product Literature

Perfect for single resident light duty installations.

Max Gate Size: 12' @ 400lbs

Gate Speed Opening: 90 Deg / 14 Sec
Cycles: 30 per hour
Motor: 1/2 Hp,120 VAC, 5.2 amp, 50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:

Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock

Product Manual

Perfect for both residential and commercial installations.

Max Gate Size: 18' @ 1000 lbs

Gate Speed Opening: 90 deg / 14 sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 amp, 50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:

Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock.

Product Manual

Perfect for commercial/industrial installations.

Max Gate Size: 22' @ 800 lbs

Gate Speed Opening: 90 deg / 20 sec
Cycles: Continuous
Motor: 1/2 Hp, 120 VAC, 4.5 amp, 50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:

Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock

Product Manual

Perfect for commercial/industrial heavy duty installations where 120VAC is present.

Max Gate Size: 22' @ 1200 lbs

Gate Speed Opening: 90 deg / 20 sec
Cycles: Continuous
Motor: 3/4 Hp, 120VAC, 8.5 amp, 50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:

Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock

Product Manual

Perfect for commercial/industrial heavy duty installations where 220VAC is present.

Max Gate Size: 22' @ 1200 lbs

Gate Speed Opening: 90 deg / 20 sec
Cycles: Continuous
Motor: 1 Hp, 220 VAC, 4.5 amp, 50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:

Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock

Product Manual

Perfect for industrial installations on very large gates where 120 VAC or 220 VAC are present.

Max Gate Size: 20' @ 3000 lbs

Gate Speed Opening: 90 deg / 16 sec
Cycles: Continuous
Motor: 3/4 Hp, 120 VAC, 8.5 amp, 50/60 Hz OR
1 Hp, 220 VAC, 4.5 amp, 50/60 Hz

Control Board:
A state-of-the-art, microprocessor controlled, surface mount pcb with features such as:

Electronic Reversing Device (ERD):
Automatically adjusts to the size of the gate.
Automatic Timer:
can be set from 0 to 60 seconds.
Master/Slave:
Three wires synchronize bi-parting gates.
Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock

Product Manual

Three models to cover a full range of commercial and residential swing gate needs.

Solid State Control Circuitry
* All SW series operators utilize a common UL325/UL991 compliant 24VDC control board
* Fully featured board for complete access control, security and entrapment protection

Polyethylene Cover
The sleek and sturdy lockable cover is available in black, tan or landscape granite with a lockable steel access door

Heavy Duty Components
* Gear reducer and pillow block bearing provides smooth, reliable and quiet power transmission
* High starting torque - heavy duty PSC motors

Standard Convenience Features
* Exterior reset button
* Power on/off button
* Accessory power outlet on 115V operators
* 3-button station
* Master/slave compatible - LH/RH selectable
* Easily accessible control box and limit switches
* Quick disconnect crank assembly
* Electrical/power disconnect
* Accepts all accessories
* Footprint 18.31" x 22.64"

ELECTRICAL FEATURES:
* Inherent entrapment sensing system featuring dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
* Continuous tone entrapment alarm with reset button
* Integrated warning beeper during gate movement
* 15 diagnostic LEDs on board for ease of setup and troubleshooting
* Selectable pre-start alarm with provision for ADA compliant visual prestart and run alarm
* AC and DC power available for access control accessories
* Integrated maximum run and auto close timer (0-124 sec)
* Built-in master/slave capability using 3-wire shielded cable

MECHANICAL FEATURES:
* Heavy duty zinc plated steel chassis
* Sleek and sturdy UV-stabilized polyethylene cover
* Universal pad mount standard - optional post mount kit available

MODEL SWD EXCLUSIVE FEATURES:
* Full DC powered operator with built in battery backup
* Continuous duty 1/2 HP DC permanent magnet motor
* Powered by 115V or 24VDC supply
* Seamless transition to battery backup mode when AC power fails
* Selectable fail-safe or fail-secure modes of operation
* Solar power capable

Model

HP

Voltage Drive
(Single Phase)

Maximum
Gate Length

Maximum
Gate weight

Seconds
to open

SWC

SWC-2

1/2

115 or 230 V

17 ft.

600 lbs

11-14
duty

SWC-1

1

115 or 230 V

19 ft.

1000 lbs

11-14
duty

SWD

SWD-211

1/2

115V/ 24 VDC
SOLAR OPTION

18 ft.

700 lbs

11-14

SWR

SWR-211
SWR-211

1/2
1/2

115 V
230 V

15 ft.
15 ft.

500 lbs
500 lbs

11-14
11-14

Product Manual

A commercial swing gate operator for gates up to 26 feet wide and 1000 lbs.

Cabinet
* Weather-resistant galvannealed steel cabinet with powder coat finish
* Lockable, gasketed and removable front cover for easy access

Mechanical
* Heavy-duty 60:1 right-angle C-face gear reducer
* Heavy-duty gate arm assembly with harmonic design for smoother starts and stops
* Over-center gate arm "locking" angle
* #40 roller chain and sprockets
* Adjustable torque limiter
* Heavy-duty pillow-block bearings

Warning Signals:
* Continuous tone entrapment alarm
* Warning beeper to sound when gate is moving
* Pre-start audio/visual outputs included

Electrical
* 1/2, 3/4 or 1 hp, 115 or 230 VAC, single phase, thermally protected, heavy duty C-face PSC motor; 1/2, 3/4 or 1 hp, 230 or 460 VAC, 3 phase heavy duty motor
* Power on/off switch
* Emergency stop/reset button on front cover
* Duplex receptacle on 115 VAC units
* Three-button control station included
* Accessory connections are 24-volt AC or DC
* Easily adjustable rotary limit switches
* Full system capable for access controls and reversing devices

Control Circuit:
* Heavy duty zinc plated steel chassis
* Sleek and sturdy UV-stabilized polyethylene cover
* Universal pad mount standard - optional post mount kit available

Anti-Entrapment/Detection Devices:
Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes

Model

HP

Voltage
Single Phase
(Voltage Three Phase)

Maximum
Gate Length

Maximum
Gate Weight

Seconds
To Open

SWG

SWG-2

1/2

115/230 V
(230/460V)

18 ft.

700 lbs

15

SWG-4

3/4

22 ft.

900 lbs

15

SWG-1

1

26 ft.

1000 lbs

15

Product Manual

Swing gate operators, variable speed.

Cabinet
* Weather-resistant galvannealed steel cabinet with powder coat finish
* Lockable, gasketed, hinged and removable front cover for easy

Mechanical
* Heavy-duty 60:1 right-angle C-face gear reducer
* Adjustable torque limiter
* Linear drive arm
* Heavy-duty pillow-block bearings

Electrical
* Variable speed - soft start/soft stop programmable through an inverter motor control (voltage & phase of input power supply required at time of order)
* Available from 1/2 to 2 hp industrial continuous-duty, three-phase, 56-frame motor
* Available in all standard voltages and phases
* Run timer for clutch and motor protection
* Delay on reverse
* Master/Slave capability built in
* Easily convertible right hand/left hand
* Solid state control circuit
* Double C-face brake
* Power on/off switch
* Duplex receptacle on 115 VAC units
* Three-button control station included
* Accessory connections are 24-volt AC or DC
* Easily adjustable rotary limit switches
* Full system capable for access controls and reversing devices

Anti-Entrapment/Detection Devices:
Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes

Model

HP

Voltage
Single Phase
(voltage three phase)

Maximum
Gate Length

Maximum
Gate Weight

Gate Speed

VS-GSWG-2

1/2

115/230 V
(208/230/460 V)

20 ft.

1000 lbs

18- 22" /sec

VS-GSWG-1

1

32 ft.

1200 lbs

VS-GSWG-7

2

36 ft.

1500 lbs

Product Manual

The DKS swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. The elegant lines obtained by using extruded aluminum material provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. And there is no need to worry about hydraulic leaks, check valves or pumps.

Internal adjustable limit switches.

Slow start / slow stop.

Overlap feature for dual swing gate operation.

Magnetic lock output.

Ports for plug-in loop detectors.

Fully enclosed screw drive.

120 VAC input power, 24 VDC operating power.

Built-in battery back-up.

Separate control panel.

Keyed release for manual operation.

Model 6002

Maximum gate width 14-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )

Swings gate 90 degrees in approximately 16-seconds.

Actuator operates at 24 Volts DC power.

Class I applications.

Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator.)

Dimensions (actuator only): 4"W x 3.75"H* x 48"L

Dimensions (deluxe control box): 12.25"W x 24.25"H x 4.25"D

Dimensions (standard control box): 12.25"W x 16.25"H x 4.25"D

Options Availiable

Bi-parting gate connection cable.
Magnetic gate lock.
Plug-in loop detectors.

Product Literature

The DKS residential swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. This compact actuator uses extruded aluminum material to provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. And there is no need to worry about hydraulic leaks, check valves or pumps.

Internal adjustable limit switches.

Slow start / slow stop.

Overlap feature for dual swing gate operation.

Magnetic lock output.

Ports for plug-in loop detectors.

Fully enclosed screw drive.

120 VAC input power, 24 VDC operating power.

Built-in battery back-up.

Separate control panel.

Keyed release for manual operation.

Model 6003

Maximum gate width 10-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )

Swings gate 90 degrees in approximately 16-seconds.

Actuator operates at 24 Volts DC power.

Class I applications.

Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator.)

Dimensions (actuator only): 5"W x 5"H x 35 "L. These dimensions are at the widest part of the actuator. It tapers down to approximetaly 2-1/2" x 3".

Dimensions (deluxe control box): 12.25"W x 24.25"H x 4.25"D

Dimensions (standard control box): 12.25"W x 16.25"H x 4.25"D

Options Availiable

Bi-parting gate connection cable.
Magnetic gate lock.
Plug-in loop detectors.

Product Literature

The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Self-adjusting, no maintenance magnetic limits.

Overlap feature for dual swing gate operation.

Designed with a built-in primary and secondary entrapment prevention system.

Ports for plug-in loop detectors.

Fail-safe release.

Tamper detect circuit.

DC Powered convenience open (Option on 6100 only).

Gate tracker reporting output.

Programming switches.

Built-in reset switch.

Built-in power On/Off switch.

Model 6050

Maximum gate width 10-feet.
Maximum gate weight 400 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator).
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP limited-duty motor.
115 VAC, 4.3 Amps.
Class I applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
Dimensions (operator only): 13.25"W x 12"H* x 23"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Model 6100

Maximum gate width 14-feet.
Maximum gate weight 500 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps.
Class I and Class II applications.
Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
Dimensions (operator only): 13.25"W x 12"H* x 23"D (28"D with convenience open option) (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Options Availiable

Bi-parting gate connection cable (6050 secondary operator is shipped with 30-feet of cable; 6100 secondary operator is shipped with 40-feet of cable.)
Post or pad mount - specify which.
DC powered convenience open (6100 only).
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.

Product Literature

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Self-adjusting, no maintenance magnetic limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention system.
Ports for plug-in loop detectors.
Two convenience outlets.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (optional).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.

Model 6300 with 1/2 HP Motor

Maximum gate width 18-feet.
Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 15-seconds.
1/2 HP continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Model 6300 with 1 HP Motor

Maximum gate width 22-feet.
Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 15-seconds.
1 HP continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
Dimensions (operator only): 13.25"W x 12"H* x 28"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Options Availiable

Primary / secondary connection cable (secondary operator is shipped with 50-feet of cable).
Post or pad mount - specify which.
DC powered convenience open.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.

Product Literature

THE MODEL 6400 installs underground making it virtually invisible and satisfies the most sophisticated automation needs without being detrimental to the original gate design. Invisible and powerful, the motor/drive mechanism is constructed in die-cast aluminum with a special corrosion-proof treatment, and because the drive unit is gear driven, there is no need to worry about hydraulic leaks, check valves or pumps. The underground self-supporting foundation box is built from corrosion-proof steel and has a galvanized steel cover. A lockable manual release lever is designed so that it can be operated from inside or outside the gate.

The 6400 features built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and with a 24 volt DC operating voltage, the 6400 is ideal for residential applications.

Internal adjustable limit switches.

Slow start / slow stop.

Overlap feature for dual swing gate operation.

Magnetic lock output.

Ports for plug-in loop detectors.

120 VAC input power. 24 VDC operating power.

Built-in battery back-up.

Separate control panel.

Keyed release for manual operation.

Model 6400

Maximum gate width 10-feet.
Maximum gate weight 300 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )
Swings gate 90 degrees in approximately 16-seconds.
Actuator operates at 24 Volts DC power.
Class I applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator.)
Dimensions (operator only): 17"W x 6"H x 12"L
Dimensions (deluxe control box): 12.25"W x 24.25"H x 4.25"D
Dimensions (standard control box): 12.25"W x 16.25"H x 4.25"D

Options Availiable

Bi-parting gate connection cable.
Magnetic gate lock.
Plug-in loop detectors.
Surge suppressors.

Product Literature

The 6500 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications for both single and bi-parting gates. The unique design of this operator allows for easy access to the electronics and mechanical areas of the operator without ever having to remove the gate arm. This simplifies installation and maintenance. The electronic magnetic limits will never wear out or break and they are easily adjusted. The solid steel frame and belt driven gear box make this operator one of the quietest on the market today. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Adjustable, no maintenance magnetic limits.

Overlap feature for bi-parting swing gate operation.

Simple connection for secondary operator in bi-parting applications.

Selectable shadow/reverse loop function.

Magnetic lock power provided.

Ports for plug-in loop detectors.

Three 115 VAC convenience outlets.

DC Powered convenience open (optional).

Gate tracker reporting output.

Programming switches.

Built-in reset switch.

Built-in power On/Off switch.

Model 6500

Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP).
Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP). (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 12-14 seconds.
1/2 or 1 HP continuous-duty motor.
115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Class I, II, III and IV applications.
Compliant with UL 325 and 991.. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices are required to be installed with this gate operator.)
Dimensions: 18.375"W x 31.675"H x 23.25"D

Options Availiable

Primary / secondary connection cable (secondary operator is shipped with 50-feet of cable).
DC powered convenience open.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.

Product Literature