Wireless

Solar

Stand-alone

Runs on 12 volts DC

Operates PVC Arms up to 12 feet

Replacement arms are low cost and easy to change

Continuous operation

Battery (not included) rechargeable with solar or electrical battery chargers

Cover is key lock secured

All internal steel parts are zinced

Cover and pedestal are powder coated

Smooth mechanical soft start and stop operation

Two-year warranty

Product Manual
Product Literature

The Mega Arm and Mega Arm Tower are DC-powered additions to the LiftMaster® family of gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, these models provide exceptional starting torque and continuous operation, making them ideal for most applications. Constructed with an aluminum alloy chassis, they're corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 6,000 cycles per day with an operator speed of 2.5 seconds to open or close.

No power? No problem!
Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.

• Radio receiver built-in
• Aluminum alloy chassis
• Built-in battery backup
• Soft start/stop
• DC operator system
• Right or seft-handed operation
• Breakaway arm
• Control inputs
• Inherent obstruction sensing
• LED indicators
• Dual gate operation
• Dynamic braking
• Magnetic sensors
• Timer to close
• 2-year warranty for electronics and mechanism;
  10-year warranty for chassis and cover

The Mega Arm Sprint and Mega Arm Sprint Tower are DC-powered, high-speed additions to the LiftMaster® family of gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, these models provide exceptional speed, making them ideal for parking applications. Constructed with an aluminum alloy chassis, they're corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 10,000 cycles per day with an operator speed of .9 seconds to open or close.

No power? No problem!
Built-in battery backup provides seamless operation of the gate operator and all DC control and sensing devices in the event of a power loss.

• Radio receiver built-in
• Aluminum alloy chassis
• Built-in battery backup
• Soft start/stop
• DC operator system
• Right or left-handed operation
• Breakaway arm
• Control inputs
• Inherent obstruction sensing
• LED indicators
• Dual gate operation
• Dynamic braking
• Magnetic sensors
• Timer to close
• 2-year warranty for electronics and mechanism;
  10-year warranty for chassis and cover

When an application calls for a barrier gate, LiftMaster's BG790 has the reliability and features you require for a commercial installation. The BG790 can be utilized in a high traffic area or integrated with another style gate to create a trap, preventing additional cars from entering a specified area prior to the previous car leaving.

The BG790 is provided by LiftMaster® with a 24-foot wishbone-style arm. Whether the operator is used individually or when utilizing the optional master/slave feature, the BG790 will cover the majority of installations from 24 to 48 feet wide. For smaller entranceways, please see our BG770 Barrier Gate Operator that supports a 12-foot standard arm.

LiftMaster's parking gates are designed for long life and durability. The weatherproof cabinet is composed of heavy-duty 11-gauge pre-galvanized steel and is baked with a powder coat finish. A continuous duty 1/2 hp industrial motor, with overload protection, is standard to withstand heavy usage and promote low maintenance.

• Plug-in connectors for open loop detector and hold open loop detector included in control box
• Multi-gate operation
• Accessory power
• Removable electrical controls
• Remote device connections
• Access panels
• On/off switch
• Control station
• Automatic/manual switch
• 2-year warranty

Product Manual

The LiftMaster® BG770 offers reliable performance barrier gate operator for industrial applications such as airports, parking garages, and manufacturing plants. Engineered for the highest durability and safety, this powerfully designed barrier gate operator supports arm lengths up to 12 feet and arms weighing up to 25 pounds. Heavy 11-gauge steel weather-resistant cabinet with a durable baked-on powder-coated finish and a continuous-duty 1/2 HP industrial motor with overload protection supports 100 cycles per hour, making this model ideal for installations that experience heavy traffic.

• Dual gate operation
• Control inputs
• Limit settings
• 2-year warranty

 OPTIONAL ACCESSORIES

• Timer to close
• Plug-in loop detectors
• Long distance wiring module

Product Manual

BGU and BGU-D barrier gates can be used for parking applications and revenue control.

Cabinet:
Weather-resistant galvannealed steel cabinet with powder coat finish

Electrical:
BGU
1/3 hp, 115 VAC, single-phase, thermally-protected open-frame, resilient-mounted PSC motor
Power on/off switch
Duplex receptacle (115 VAC units only)
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable cam-operated limit switches
Motor has manually-resettable overload
Full system capable for access control and reversing devices

BGU-D
24 VDC permanent magnet motor
115 VAC supply converted to 24 VDC for motor and controls
Power on/off switch
Three-button control station included
Accessory connections are 24 VDC
Easily adjustable cam-operated limit switches
Full system capable for access controls and reversing devices

BGU-D Battery Back-up:
Dual batteries charged by 115 VAC or optional solar panels
Charging circuit monitors and maintains battery levels, monitors AC availability, automatically switches to batteries when AC is removed, and automatically resumes AC operation
Control circuit options in absence of AC power
Option 1: Fail safe (opens the gate and shuts down until AC power is restored)
Option 2: Fail secure (continues to cycle gate in normal operation until batteries run down and then cycles open. Resumes cycling when existing batteries are charged or when fresh batteries are installed) 

Anti-Entrapment/Detection Devices:
Operator is pre-wired to accept contact and non-contact detection devices such as reverse edges and/or photo electric eyes

Warning Signals:
Pre-start audio/visual outputs provided

Options:
BGU
230V, single-phase operation
Stainless steel cabinet for installations in areas where
high concentration of corrosive materials is present
Thermostatically-controlled
strip heater
Arm light kit

BGU-D
Stainless steel cabinet for installations in areas where high concentration corrosive material is present
Arm light kit
*Optional solar panels


Mechanical:
Dual V-Belt
Heavy-duty right-angle oil bath gear reduction
Heavy-duty harmonic link with oil impregnated bronze bushings
Gate arm clamp with cutting bracket 

Control Circuit:
Solid state circuit board, 24-volt AC or DC
Inherent current sensing system
15 LEDs for easy setup and troubleshooting
Built-in maximum run timer and auto close timer
Master/Slave - simple three-wire connection

Gate Arm:
10', 12' or 14'
Constructed of 1"x4" soft wood, painted white with yellow and black warning tape and labels on each side.

Product Manual

BGUS barrier gates can be used for traffic control and parking applications.

Cabinet:
Weather-resistant galvannealed steel cabinet with powder coat finish
Lockable and removable front cover for easy access

Electrical:
1/2 hp, 115 VAC, single-phase, thermally-protected, open-frame, resilient-mount PSC motor
Power on/off switch
Duplex receptacle (115 VAC units only)
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable cam-operated limit switches
Motor has manually-resettable overload
Full system capable for access controls and reversing devices 

Control Circuit:
Solid state circuit board, 24-volt AC or DC
Inherent current sensing system
15 LEDs for easy setup and troubleshooting
Built-in maximum run timer and auto close timer
Master/Slave - simple three-wire connection

Gate Arm:
16-foot arm
Constructed of 5/4 soft wood, painted white with yellow and black warning tape and labels on each side 

Anti-Entrapment/Detection Devices:
Operator is pre-wired to accept contact and non-contact detection devices such as reverse edges and/or photo electric eyes

Warning Signals:
Pre-start audio/visual outputs provided

Options:
Optional thermostatically-contolled strip heater
Stainless steel option available with welded, powder coated cabinet for installations in areas where high concentration of corrosive material or atmosphere is present

Mechanical:
Dual V-belt
Heavy-duty right-angle gear reducer
Heavy-duty harmonic link with oil impregnated bronze bushings
Gate arm clamp with breaker bar

Product Manual

An SG barrier gate can be used for control of large industrial vehicular traffic (for high-use applications on wide driveways, use two model BGU 12, one on each side of the driveway).

Cabinet:
Weather-resistant galvannealed steel cabinet with powder coat finish
Lockable and removable front access panel for easy access

Electrical:
1/2 hp, 115 VAC, single-phase, thermally-protected, open-frame, resilient-mount PSC motor
Power on/off switch
Duplex receptacle (115 VAC units only)
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable cam-operated limit switches
Full system connections for access controls and reversing devices 

Anti-Entrapment/Detection Devices:
Operator is pre-wired to accept contact and non-contact detection devices such as reverse edges and/or photo electric eyes

Warning Signals:
Pre-start audio/visual outputs provided

Options:
230V, single-phase operation
Powdercoated stainless steel cabinet for installations in areas where high concentration of corrosive material is present
Thermostatically-controlled strip heater
Arm signal light kit

Mechanical:
Dual V-belt drives
Heavy-duty 75:1 right-angle oil bath gear reduction
Heavy-duty harmonic link with oil impregnated bronze bushings 

Control Circuit:
Solid state circuit board, 24-volt AC or DC
Inherent current sensing system
15 LEDs for easy setup and troubleshooting
Built-in maximum run timer and auto close timer
Master/Slave - simple three-wire connection

Gate Arm:
Heavy-duty wishbone style
Available in lengths from 16 to 25 feet
Constructed of 1x6" soft wood, painted white with yellow and black warning tape and warning labels on each side
Includes appropriate counterweight system

Product Manual

The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications.   The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway.   The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

• Magnetic limit control.
• Ports for plug-in loop detectors.
• Automatic sequencing inputs for use with slide and swing gate operators.
• Up input memory buffer.
• Down memory option.
• Multiple up commands.
• Two convenience outlets.
• 360° gear box rotation.
• Gate tracker reporting output.
• Programming switches.
• Built-in power On/Off switch.
• Left or right hand mount.
• 1/2 HP continuous-duty motor.
• 115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• 40:1 gear-box running in a continuous oil bath.
• Arm rotates 90° in approximately 1.5 seconds.
• Class II, III and IV applications.
• Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)
• Dimensions (operator only): 15.25"W x 39.75"H x 14.75"D.

Options Availiable

DC powered convenience open.
14-foot round aluminum arm.
14-foot wood arm.
Wood arm folding bracket for low headroom.
12-foot plastic arm.
Plastic arm folding bracket for low headroom.
Foam padding for aluminum or wood arm.
Plug-in loop detectors.
Heater kit.
Fan kit.
Surge suppressors.

Product Literature

The 1602 operator is designed for traffic lanes up to 20-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

• Magnetic limit control.
• Ports for plug-in loop detectors.
• Automatic sequencing inputs for use with slide and swing gate operators.
• Up input memory buffer.
• Down memory option.
• Multiple up commands.
• Two convenience outlets.
• 360° gear box rotation.
• Gate tracker reporting output.
• Programming switches.
• Built-in power On/Off switch.
• Left or right hand mount.
• 1 HP continuous-duty motor.
• 60:1 gear-box running in a continuous oil bath.
• 115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Arm rotates 90° in approximately 5.5 seconds.
• Class III and IV applications.
• Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)  
• Dimensions (operator only): 15.25"W x 39.75"H x 15.75"D.

Options Availiable

DC powered convenience open.
20-foot three-piece wood arm - counter balanced.
Plug-in loop detectors.
Heater kit.
Fan kit.
Surge suppressors.

Product Literature

The DKS model 1603 Barrier Gate Operator / Automated Spike System is designed as a modular system allowing for easy flexibility in different applications and easy installation. The 1603 operator is designed with many advanced features and mechanically links the spikes to the barrier arm. The surface mount spikes are easy to install and do not require any trenching or excavating. The 1603 auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete 1603 / auto-spike system consist of several different components. A typical system will require a 1603 operator, transfer box (transfer box is factory installed to the 1603 operator), tunnel section(s) as needed, spike section(s) as needed, end cap. A traffic signal and/or warning sign is required with this system.

Magnetic limit control.

Ports for plug-in loop detectors.

Automatic sequencing inputs for use with slide and swing gate operators.

Up input memory buffer.

Down memory option.

Multiple up commands.

Two convenience outlets.

Gate tracker reporting output.

Programming switches.

Built-in power On/Off switch.

Left or right hand mount.

1/2 HP continuous-duty motor.

115, 230°, 460° VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

40:1 gear-box running in a continuous oil bath.

Arm rotates 90° in approximately 1.5 seconds.

Class II, III and IV applications.

Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.)

Dimensions: 15.25"W x 43.75"H x 14.75"D.

Spike Component

Tunnel sections surface mount: 31"W x 3"H x 24 or 36"L

Spike sections surface mount: 31"W x 3"H x 36 or 72"L

End Cap: 31"W x 3"H x 12.25"L

Options Availiable

DC Powered convenience open.

14-foot round (3" dia) aluminum arm.

14-foot 1 x 3 inch wood arm.

Arm folding bracket assembly for low headroom (wood arm only).

Foam padding for arms.

Fan Kit

Heater Kit

Plug-in loop detectors.

Surge suppressors.

Product Literature

Warning signs and traffic signals are used with traffic control spikes and auto-spikes to inform drivers that a one way lane condition exist and that proceeding in the wrong direction, or before the spikes are fully retracted, will result in severe tire damage.   Warning signs and/or traffic signals should always be used in any traffic control application utilizing traffic control spikes. 

Warning Signs

• Light sensor for automatic operation.
• Built-in flood lamp for spike illumination.
• Keyed on/off override switch.
• Illuminated with two 20-watt fluorescent lamps.
• 150-watt flood lamp for spike illumination.
• 115 VAC.
• ETL Listed.
• Dimensions: 24"H x 24"W x 8"D.
• Designed to be mounted on 3" mounting pipe (not included).

Traffic Signal

• Red / green signal operates in sync with operator.
• 8-inch lenses
• 8000 hour / 67 watt traffic bulbs.
• Illuminated with two 67-watt, 8000 hour traffic lamps.
• 115 VAC.
• UL Listed.
• Dimensions: 21"H x 9.75"W x 14"D.
• Designed to be mounted on 1603-215 mounting post (not included).

Product Literature

Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location.   Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes.   Speed bumps force drivers to slow down while driving through the controlled entry point. They are also ideal for keeping vehicular traffic at a safe speed while driving over traffic spikes. 

Flush Mount Traffic Spikes

• Individual spring loaded spikes.
• Stainless steel springs.
• Weight spikes (no springs) version available.
• Lock-down version available.
• Flush in-ground unit.
• Painted bright red for easy visibility.
• Ideal to enforce one-way traffic.
• Dimensions: 6.5"H x 12.5"W x 72"L.   Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
• Speed bumps should always be used with traffic spikes.   Speeds in excess of 5-MPH over the spikes can cause tire damage.

Surface Mount Traffic Spikes

• Spikes sections available in 3-foot sections.
• End caps provide a smooth end to the spike section.
• Torsion springs.
• Lock-down standard.
• Surface mount unit.
• 1/4-inch diamond plate painted bright yellow for easy visibility.
• 3-inch rise provides a built-in speed bump.
• Dimensions: 3"H x 31"W x 36"L.   Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
• Speed bumps should always be used with traffic spikes.   Speeds in excess of 5-MPH over the spikes can cause tire damage.

Speed Bumps

• Speed bumps are constructed from solid composite material.
• Speed bumps can be easily removed and re-installed.
• Painted bright yellow for easy visibility.
• Designed for installation on concrete surfaces only.
• Dimensions: 2"H x 11.5"W x 72"L.

Product Literature